5.20
TAB. 5.7
GEAR OIL SPECIFICATION
ITEM NAME
VALUE
1
SAE viscosity classification
80W/90
2
Kinematic viscosity at 100
0
C
14.0 – 20.0 mm
2
/s
3
Viscosity index, min
95
4 API
quality
class
GL4
Sand spreader lubrication should be performed with the aid of a manually or foot operated
grease gun, filled with generally available permanent grease. Before lubricating, insofar as is
possible remove old grease and other contamination. After lubricating the machine according
to instructions, wipe off excess grease or oil.
Replace oil in reduction gear every 24 months or add in case of oil carry-over. Oil level
should be checked regularly, because in case of larger oil loss, repair of reduction gear seals
may be necessary. Before fresh oil is added, read the instructions of Manufacturer and make
sure that rinsing of reducer is not required. Supplement oil to required level (oil level indicator
is located under inspection glass on the reduction gear body).
When using the sand spreader the user is obliged to observe lubrication instructions
according to attached schedule. Excess lubrication substance causes depositing
additional contaminants in places requiring lubrication, therefore it is essential to keep
individual machine elements clean.
5.11
TIGHTENING TORQUE FOR NUT AND BOLT
CONNECTIONS
Unless other tightening parameters are given, during maintenance repair work apply
appropriate torque to tightening nut and bolt connections. Recommended tightening torque of
most frequently applied nut and bolt connections are given in table (
5.8
). Given values apply
to non-lubricated steel bolts.
Содержание T130
