PRONAR T130 Скачать руководство пользователя страница 18

Страница: 18 / 90

2.4

•

While connecting the sand spreader to the tractor, use only the lower hitch

designed for single axle trailers. After mounting the machine, check the

safeguards.

•

When spreading is completed, disengage the hydraulic drive of the feeding

mechanism and discs.

•

Before loading make certain that there are no stones, tools or other objects in

the load box and on the adapter's discs.

•

Do NOT exceed permissible load weight of sand spreader because this may

cause danger to road traffic and cause damage to the machine.

•

The load in the sand spreader's load box must be distributed uniformly.

•

The sand spreader drive may be started only when there are no bystanders or

animals within the radius of approximately 3 metres from the machine.

•

Spreading

agents

must

be prepared in accordance with the regulations

concerning winter road maintenance in force in the country in which the sand

spreader is used. Spreading agents other than those recommended by the

Manufacturer must not be used.

•

The hydraulic system is under high pressure when operating.

•

Regularly check the technical condition of the connections and the hydraulic

and pneumatic leads.

•

In the event of malfunction of the hydraulic or pneumatic system, do not use the

sand spreader until the malfunction is corrected. There must not be any leaks of

hydraulic oil.

•

When connecting the hydraulic conduits to the tractor, make sure that the

tractor and sand spreader hydraulic system are not under pressure.

•

Reduce the oil or air pressure in the sand spreader before dismantling the

hydraulic or pneumatic elements.

•

In the event of injuries being caused by pressurised hydraulic oil, contact a

doctor immediately. Hydraulic oil may find its way under the skin and cause

infections.

Содержание T130



























































































Результаты поиска

Содержание T130

Отзывы:

Похожие инструкции для T130

Бренды по названию

Популярные бренды

PRONAR T130, Руководство оператора

Результаты поиска

Содержание T130

Отзывы:

Похожие инструкции для T130

Бренды по названию

Популярные бренды