PRONAR T130, Руководство оператора

Страница: 82 / 90

5.18
ground is changed. The tyres will not be deformed and maintain proper geometry. Also tyre
pressure should be inspected from time to time, and if necessary pressure should be
increased to appropriate value.
5.10 LUBRICATION
Sand spreader lubrication shall be performed where indicated on figure ( 5.10A ) as stipulated
in table ( 5.6) .
TAB. 5.6 LUBRICATION POINTS
ITE
M
NAME
NUMBER
OF
LUBRICATI
ON POINTS
TYPE OF
GREASE
LUBRICATION
FREQUENCY
1 Handbrake crank mechanism 1 PERMANENT 3 months
2 Wheel bearings 2 PERMANENT 24 months
3
Pin of cable roller of parking
brake
1 PERMANENT 6 months
4
Socket of equalising bar and
expander arms
2 PERMANENT 3 months
5 Support screw 1 PERMANENT 6 months
6 Reducer 1 OIL 24 months
7 Rotating drawbar eye 1 PERMANENT 3 months
IMPORTANT! Marking description in Item column in table (5.6) conforms with numbering
shown in figure (5.10A).