Chapter 4: Installing Software Drivers
37
Existing Windows NT4.0 Installation
The following section details the reinstallation of PDC20319 SATA RAID
Controller
drivers on a system that has Windows NT4.0 already installed and
running.
NOTE: Do not attach the boot drive or any other hard drive to the PDC20319
SATA RAID Controller before completing this step.
1. From the Start menu, choose Settings.
2. From the Settings menu, choose Control Panel.
3. Double-click the SCSI Adapters icon. The SCSI Adapters dialog box
appears.
4. Choose Drivers then click Add.
5. In the Install Drivers dialog box, click Have Disk…
6. When Install From Disk appears, insert the driver diskette in drive A:.
7. Type
A:\NT4
in the text box window then click OK.
8. When the Install Driver dialog box appears, select
Windows NT4.0: Promise
PDC20319 SATA RAID Controller (FastTrak S150 TX4)
then click OK.
9. When the Select SCSI Adapter Option dialog box appears, click Install.
10. After a successful installation, the SCSI Adapter Setup box will show that
the
Windows NT4.0: Promise PDC20319 SATA RAID Controller (FastTrak
S150 TX4)
has been installed.
11. Power off your system.
12. If you plan to move the boot drive to the PDC20319 SATA RAID Controller,
do it now. Otherwise reboot.
Remove Driver from Windows NT4.0
1. From the Start menu, choose Setup then choose Control Panel.
2. In Control Panel, choose SCSI Adapter then choose Drivers.
3. Click the Remove button.
4. After successful removal, the SCSI Adapter Setup box will show that the
Windows NT4.0: Promise PDC20319 SATA RAID Controller (FastTrak
S150 TX4)
has been removed.
Содержание PDC20319
Страница 1: ...PDC20319 SATARAIDCONTROLLER USER MANUAL Version 1 3...
Страница 42: ...PDC20319 SATA RAID Controller User Manual 38...
Страница 58: ...PDC20319 SATA RAID Controller User Manual 54...