PDC20319 SATA RAID Controller User Manual
36
New Windows NT4.0 Installation
The following details the installation of the PDC20319 SATA RAID Controller
drivers while installing Windows NT4.0.
1. Start the system installation by booting from the Windows NT disk:
•
Floppy install: boot the system with the Windows NT installation
diskettes.
•
CD-ROM disk install: boot from the CD-ROM disk and press F6 when
the message “Setup is inspecting your computer’s hardware
configuration…” appears.
2. When the Windows NT Setup window is generated, press S to Specify an
Additional Device(s).
3. Press O to select
Other
then press Enter.
4. Insert the driver diskette into drive A: and press Enter.
5. Choose
Windows NT4.0: Promise PDC20319 SATA RAID Controller
(FastTrak S150 TX4)
from the list that appears on screen then press Enter.
6. The Windows NT Setup screen will appear again saying “Setup will load
support for the following mass storage devices:” The list will include
Windows NT4.0: Promise PDC20319 SATA RAID Controller (FastTrak
S150 TX4)
.
NOTE: If there are any additional devices to be installed, specify them now.
When all devices are specified, continue to the next step.
7. From the Windows NT Setup screen, press Enter. Setup will now load all
device files and then continue the Windows NT installation.
8. After a successful installation, the SCSI Adapter Setup box will show that
the
Windows NT4.0: Promise PDC20319 SATA RAID Controller (FastTrak
S150 TX4)
driver has been installed.
Содержание PDC20319
Страница 1: ...PDC20319 SATARAIDCONTROLLER USER MANUAL Version 1 3...
Страница 42: ...PDC20319 SATA RAID Controller User Manual 38...
Страница 58: ...PDC20319 SATA RAID Controller User Manual 54...