5
Chapter 2: Create Your Disk Array
Your PDC20319 SATA RAID Controller includes the onboard FastBuild BIOS
utility to create your array using the attached drives. There are three different
scenarios in creating the array. You can create an array for:
•
Performance
•
Security, using new hard drives (recommended)
•
Security, using an existing hard drive and a new one
•
Security, using Quick Initialization
The first three steps are the same for all three choices. After that, follow the
steps for the array you want to create.
1. Boot your system. If this is the first time you have booted with the
PDC20319 SATA RAID Controller and drives installed, the Promise
onboard BIOS will display the following screen.
FastTrak S150 TXx (tm) BIOS Version 1.aa (Build xxxx)
(c) 2002-2005 Promise Technology, Inc. All Rights Reserved
No array defined . . .
Press <Ctrl-F> to ender FastBuild (tm) Utility
Or press <ESC> key to continue booting the system
2. Press the Ctrl-F keys to display the FastBuild Utility Main Menu.
3. Press “1” to display the Auto Setup Menu below. This is the fastest and
easiest method to creating your first array.
Содержание PDC20319
Страница 1: ...PDC20319 SATARAIDCONTROLLER USER MANUAL Version 1 3...
Страница 42: ...PDC20319 SATA RAID Controller User Manual 38...
Страница 58: ...PDC20319 SATA RAID Controller User Manual 54...