PDC20319 SATA RAID Controller User Manual
26
Rebuild a Mirrored Array
The Rebuild Array (5) Menu option can be used to recover from an error in a
mirrored disk array. You will receive an error message when booting your
system from the PDC20319 SATA RAID Controller BIOS.
Important
Drives MUST be replaced if they contain any physical
errors.
Follow these steps before using the Rebuild Array menu option:
1. On bootup, the PDC20319 SATA RAID Controller BIOS will display an error
message identifying which drive has failed.
2. Press Ctrl-F to enter FastBuild Utility’s Main Menu.
3. Select submenu Define Array (3).
4. Select the failed array and identify the Channel number of the failed drive.
PDC20319
RAID
Figure 2.
Identify a failed drive by its Channel number on the Controller.
5. Power off your computer and open the case.
6. Follow the Serial ATA cable from the Controller channel reporting the failed
drive to the drive itself. Remove the failed drive.
7. Replace the failed drive with an identical new drive.
Ch. 4 Ch.2 Ch.1 Ch.3
For future use LED Pins
Содержание PDC20319
Страница 1: ...PDC20319 SATARAIDCONTROLLER USER MANUAL Version 1 3...
Страница 42: ...PDC20319 SATA RAID Controller User Manual 38...
Страница 58: ...PDC20319 SATA RAID Controller User Manual 54...