PDC20319 SATA RAID Controller User Manual
32
New Windows XP Installation
The following details the installation of the drivers while installing Windows XP.
1. Start the installation:
•
Floppy Install: Boot the computer with the Windows XP installation
diskettes.
•
CD-ROM Install: Boot from the CD-ROM. Press F6 after the message
“Press F6 if you need to install third party SCSI or RAID driver”
appears.
2. When the Windows XP Setup window is generated, press S to specify an
Additional Device(s).
3. Insert the driver diskette into drive A: and press Enter.
4. Choose
Windows XP: Promise PDC20319 SATA RAID Controller (FastTrak
S150 TX4)
from the list that appears on screen, and press Enter.
5. Press S to use the driver on the floppy disk and then press Enter to
continue with installation.
6. The Windows XP Setup screen will appear again saying “Setup will load
support for the following mass storage devices:” The list will include
Windows XP: Promise PDC20319 SATA RAID Controller (FastTrak S150
TX4)
.
NOTE: If there are any additional devices to be installed, specify them now.
When all devices are specified, continue to the next step.
7. From the Windows XP Setup screen, press the Enter. Setup will now load
all device files and then continue the Windows XP installation.
Содержание PDC20319
Страница 1: ...PDC20319 SATARAIDCONTROLLER USER MANUAL Version 1 3...
Страница 42: ...PDC20319 SATA RAID Controller User Manual 38...
Страница 58: ...PDC20319 SATA RAID Controller User Manual 54...