PDC20319 SATA RAID Controller User Manual
6
FastBuild (tm) Utility 2.xx
(c) 2002-2005 Promise Technology, Inc.
[Auto Setup Options Menu]
Optimize Array for:
Performance
[ Auto Setup Configuration ]
Mode ....................................................................... Stripe
Spare
Drive ............................................................. 0
Drives used in Array ................................................ 2
Array Disk Capacity................................................. 160048
[ Keys Available ]
[
↑
] Up [
↓
] Down [
←
,
→
, Space] Change Option [ESC] Exit [Ctrl-Y] Save
Create a Performance Array
Use this setting to create a Striped (RAID 0) array. PDC20319 enables you to
create striped arrays with 1, 2, 3, or 4 drives. These arrays have no fault
tolerance.
To create an array for best performance, follow these steps:
1. Press the Spacebar to choose
Performance
under the Optimize Array for
section.
2. Press Ctrl-Y to Save and create the array.
3. Reboot your system.
4. Once the array has been created, you will need to FDISK and format the
array as if it were a new single hard drive.
5. Once the arrayed drives have been formatted, proceed to Chapter 4 of this
Manual to install your operating system and/or driver.
Содержание PDC20319
Страница 1: ...PDC20319 SATARAIDCONTROLLER USER MANUAL Version 1 3...
Страница 42: ...PDC20319 SATA RAID Controller User Manual 38...
Страница 58: ...PDC20319 SATA RAID Controller User Manual 54...