Promise Technology FastTRAK66, Руководство пользователя

Страница: 54 / 73

Operating System Installation
Windows NT 3.5x and NT 4.0
FastTrak66 supports operation under Windows NT 3.5x and later versions.
Driver Installation During Windows NT 3.5x and NT 4.0 Install
1a) Floppy Install: Boot the computer with the Windows NT installation dis-
kettes.
1b) Floppyless Install: Boot from floppy and type “WINNT /B”. After files have
been copied, the system will reboot. On the reboot, press <F6> when the
message “Setup is inspecting your computer’s hardware configuration...”
appears.
1c) CD-ROM Install: Boot from the CD-ROM and press <F6> when the message
“Setup is inspecting your computer’s hardware configuration...”.
2) Press “S” to add a SCSI adapter.
3) Select “Other (requires disk provided by hardware
manufacturer).”
4) Specify “a:\”, insert the Promise driver diskette into drive A: and press
ENTER.
5) Select the “Promise Technology Inc. FastTrak66 RAID Controller” and click
“OK”. Note: for CD installations, you must also specify the driver for your
CD-ROM adapter (i.e. if using an ATAPI CD-ROM, specify the IDE 2.1
controller)
6) Follow the normal setup installation procedure.
Installing Driver in an Existing Windows NT System
If you will be attaching an existing drive to FastTrak66 that was already installed
under a Windows NT installation, you must follow the steps to install the Fast-
Trak66 NT Driver BEFORE you move the drive from your current IDE controller.
Installing in Existing Win NT 3.5x Systems
1) In “Program Manager,” double-click on “Windows NT Setup” in “Main”
group.
2) In “Windows NT Setup,” select “Options”, next choose “Add/Remove SCSI
Adapters...”
3) In “SCSI Adapter Setup,” click on “Add...”
4) In “Select SCSI Adapter Option,” select “Other (Requires a disk from a
hardware manufacturer)” in the “Adapter:” box.
7-3