Promise Technology FastTRAK66, Руководство пользователя

Страница: 28 / 73

FastBuild
TM
Configuration Setup
FastBuild (tm) Utility 1.xx (c) 1995-99 Promise Technology, Inc.
[ Rebuild Array Menu ]
Array No RAID Mode Total Drv Status
Array 2 Mirror 2 Critical
Stripe Block: Not Available
[ Select Drive for Rebuild ]
Channel:ID Drive Model Capacity (MB)
1 : Slave MAXTOR87000A8 6522
[ Keys Available ]
[
Ž
] Up [

] Down [ESC] Exit [Enter] Select
Highlight the Critical array and press [Enter]. The following screen will then appear:
Under [Select Drive for Rebuild], highlight the drive to replace the failed drive. Press
enter and confirm that the data will be copied onto the selected drive. All data on the
replacement drive will be written over with mirrored information from the array drive.
NOTE: For automatic rebuilds of a mirrored array, attach an extra “spare” drive to
the FastTrak66. Drives that are not assigned to an array and are the same size or
larger than the original will be used for the automatic rebuild. This is performed in
the background under all supported operating systems, except DOS. At a later
time, the failed drive can be physically removed.
4-11