Promise Technology FastTRAK66, Руководство пользователя

Страница: 13 / 73

Quick Installation
[ 4 ] Starting the Operating System
See the steps below for a new operating system installation. For other supported
operating systems, see Chapter 7 for instructions.
1) Boot to Disk 1 of the DOS installation diskettes or manually partition and
format new drives with standard DOS FDISK and FORMAT utilities.
2) Install DOS, Windows, and/or Windows95/98 using the “Setup.exe” utility
found on the Microsoft installation diskettes.
Driver Installation
For DOS and Windows 3.1x: No drivers need to be installed. The FastTrak66 BIOS
will provide enhanced operation.
Windows95/98 setup will show a “New Hardware Found” dialog box. Under ver-
sions 4.00.950 and 4.00.950 an “Unknown PCI Device” will be detected. Under
versions 4.00.950 B “PCI RAID Controller” will be displayed.
NOTE:
Obtain the Windows95/98 version number as follows: 1) Under the My
Computer icon, click Control Panel; 2) click the System icon. Note the version
number that appears here.
1) In the dialog box, choose “Driver from disk provided by hardware manufac-
turer” button. In the a: drive, insert the FastTrak66 utility diskette and type in
“A:\” where prompted for the directory.
2) Select “Promise Technology, Inc. PCI FastTrak66 Driver” and click on Next.
The FastTrak66 driver is now copied onto the system and entered into the
Windows95/98 driver database.
3) When the "System Settings Change" dialog box appears, remove the floppy
diskette and click on “Yes” to restart the system. Windows95/98 will then
restart for the driver installation to take effect.
Confirming Windows95/98 Installation
From Windows95/98, open the Control Panel from My Computer followed by the
System icon. Choose the “Device Manager” tab and click the “+” in front of the
“SCSI Controllers” hardware type. The driver “Promise Technology, Inc. PCI Fast-
Trak66 Driver” driver should be installed.
2-4