Promise Technology FastTRAK66, Руководство пользователя

Страница: 23 / 73

FastBuild
TM
Configuration Setup
Define Array Definition Menu will next appear that allows drive assignments to the
disk array.
Define Array Definition Menu
Selecting an Array # from the Define Array Menu brings up the Define Array
Definition Menu screen. Under the Definition section, highlight the Array # and
use the [Space] key to cycle through three array types: Performance (RAID 0
FastBuild (tm) Utility 1.xx (c) 1995-99 Promise Technology, Inc.
[ Define Array Definition Menu ]
Array No RAID Mode Total Drv Capacity(MB) Status
Array 1 Stripe 2 13044 Functional
Stripe Block: 64 KB
[ Drive Assignments ]
Channel:ID Drive Model Capacity (MB) Assignment
1 : Master MAXTOR87000A8 6522 Y
1 : Slave MAXTOR87000A8 6522 N
2 : Master MAXTOR87000A8 6522 Y
[ Keys Available ]
[
Ž
] Up [

] Down [ESC] Exit [Space] Select [Ctrl-Y] Save
Striping), Fault Tolerance (RAID 1 Mirroring, RAID 0+1 Striping/Mirroring (for 4
drives ), or Capacity (Spanning). See Auto Setup or Chapter 5 about RAID levels.
Drive Assignments Options
Under the [ Drive Assignments ] section, highlight a drive and with the [Space] bar
key change the Assignable option to “Y” to add the drive to the disk array. Press
<Ctrl-Y> to save the disk array information. Depending on the array type selected,
the following scenarios will take place:
1) If choosing a Striping, Spanning, or Mirroring/Striping array, the initial Define
Array Menu screen will appear with the arrays defined. From there you may
ESC to exit and return to the Main Menu of FastBuild.
2) If you selected a Mirroring array for two drives, there is an additional window
that appears as described in order to create the array. To do this you will use
either two brand new drives, or one drive that contains existing data that you
wish to mirror.
4-6