Promise Technology FastTRAK66, Руководство пользователя

Страница: 22 / 73

FastBuild
TM
Configuration Setup
Define Array <3>
The Define Array screen allows users to begin the process of defining the drive
elements and RAID levels for each disk array. Users will commonly create one or
two drive arrays with FastTrak66, though the card will support a maximum of four
arrays. [A user may use a single drive in either striping or spanning mode with
FastTrak66. In this rare scenario, the card will create an individual array ID but will
offer conventional controller performance, depending on the drive type. At a later
time, a second drive can be added to the array and the array re-created to support
RAID 1 mirroring].
NOTE:
For most installations, Promise recommends the <1> Auto Setup for easy
disk array creation.
To manually create an array from the Define Array Menu above, use the arrow keys
to highlight an array number you wish to define, and press [Enter] to select. The
FastBuild (tm) Utility 1.xx (c) 1995-99 Promise Technology, Inc.
[Define Array Menu]
Array No RAID Mode Total Drv Capacity(MB) Status
Array 1 Stripe 2 13440 Functional
Array 2 —— —— —— ——
Array 3 —— —— —— ——
Array 4 —— —— —— ——
[ Keys Available ]
Note: * — Bootable Array
[
Ž
] Up [

] Down [ESC] Exit [Enter] Select [Space] Change Boot Drive
4-5