Read the following supplementary information in its entirety! Should you
already know this information, you will benefit more from referring to the
operating instructions.
The following are highlighted separately in the document:
n
Enumerated lists
- refer to... References
Instructions
ð
Results
‘User interface text’
[Keys]
Information
This provides important information relating to the correct
operation of the unit or is intended to make your work easier.
Safety notes
Safety notes are identified by pictograms - see Safety Chapter.
The chapters "Control elements", "Start up" and "Operation"
explain the setting menus in the sequence in which they
arise.
This document includes notes and quotes from German guidelines relating
to the system operator's scope of responsibility. This information does not
discharge the operator from his responsibility as an operator and is
intended only to remind him or make him aware of specific problem areas.
This information does not lay claim to being complete, nor applicable to
every country and every type of application, nor to being unconditionally
up-to-date.
The version number of the hardware and software can be found here:
Set metering to
‘OFF’
on the control (
[Start/Stop]
key) .
After
[Change]
has been pressed, the control switches to the Versions
display.
In case of complaints, or if expanding the scope of use of the device,
specify the version number in addition to the identity code.
Supplementary information
Fig. 1: Please read!
Notes for the System Operator
Version number of the hardware and soft‐
ware
Supplemental instructions
2