4
Storage and transport
WARNING!
Only return the device for repair in a cleaned state and with
hydraulic components - refer to the chapter "Decommis‐
sioning"!
Only send the unit complete with a filled in Decontamination
Declaration form. The Decontamination Declaration consti‐
tutes an integral part of an inspection / repair order. A unit
can only be inspected or repaired when a Decontamination
Declaration Form is submitted that has been completed cor‐
rectly and in full by an authorised and qualified person on
behalf of the operator.
The "Decontamination Declaration Form" can be found in the
Appendix or under
www.prominent.com
.
CAUTION!
Danger of material damage
The device can be damaged by incorrect or improper storage
or transportation!
–
The unit should only be stored or transported in a well
packaged state - preferably in its original packaging.
–
The packaged unit should also only be stored or trans‐
ported in accordance with the stipulated storage condi‐
tions.
–
The packaged unit should be protected from moisture
and the ingress of chemicals.
The chlorine dioxide Bello Zon
®
CDL system is supplied in wooden pack‐
aging.
Data
Value Unit
Minimum storage and transport tempera‐
ture
+5 °C
Maximum storage and transport tempera‐
ture
+50 °C
Maximum air humidity *
92 % rel.
humidity
* non-condensing
Miscellaneous: Protect against sunlight
In addition to the identity code options, the scope of supply includes:
n
The mounting kit (mounting equipment and threaded cable glands)
n
Labels for suction lances / suction assemblies
n
Warning signs - see chapter "Mounting and hydraulic installation"
Safety notes
Packaging
Ambient conditions
Scope of supply
Storage and transport
12