manualshive.com logo in svg

ProMinent DULCODOS Pool Comfort, Руководство по сборке и эксплуатации, Страница: 62 / 84

Поделиться
Скачать
ProMinent DULCODOS Pool Comfort Скачать руководство пользователя страница 62

9 

Maintenance

WARNING!
Danger from hazardous substances!
Possible consequence: Fatal or very serious inju‐

ries.
Please ensure when handling hazardous sub‐

stances that you have read the latest safety data

sheets provided by the manufacture of the haz‐

ardous substance. The actions required are

described in the safety data sheet. Check the

safety data sheet regularly and replace, if neces‐

sary, as the hazard potential of a substance can be

re-evaluated at any time based on new findings.
The system operator is responsible for ensuring

that these safety data sheets are available and that

they are kept up to date, as well as for producing

an associated hazard assessment for the worksta‐

tions affected.

Observe the operating instructions for the metering

pump (optional), in-line probe housing, sensors,

dirt filter and multifunctional valve (optional).
Thoroughly flush the metering system with water

before carrying out maintenance.
You have to calibrate the sensors regularly. That

means: 24 hours after initial calibration and then

weekly thereafter. Take into account any differing

national regulations.

9.1  Maintenance work

Tab. 9: An overview of maintenance work

Maintenance interval

Maintenance task

daily

Check swimming pool water values
Only with Beta

®

 metering pump: Check the metering pump LEDs

Only with the flocculant metering option: Check the peristaltic pump DF4a

LEDs
Check storage tank liquid levels

weekly

Visual inspection of metering system (flow meter)
Check sensor

6 months

Clean dirt filters

12 months

Maintenance by Service

Maintenance

 

 

 

62

Содержание DULCODOS Pool Comfort





















































































Отзывы:

Нет отзывов