manualshive.com logo in svg

ProMinent DULCODOS Pool Comfort, Руководство по сборке и эксплуатации, Страница: 30 / 84

Поделиться
Скачать
ProMinent DULCODOS Pool Comfort Скачать руководство пользователя страница 30

7 

Start up

WARNING!
Danger from hazardous substances!
Possible consequence: Fatal or very serious inju‐

ries.
Please ensure when handling hazardous sub‐

stances that you have read the latest safety data

sheets provided by the manufacture of the haz‐

ardous substance. The actions required are

described in the safety data sheet. Check the

safety data sheet regularly and replace, if neces‐

sary, as the hazard potential of a substance can be

re-evaluated at any time based on new findings.
The system operator is responsible for ensuring

that these safety data sheets are available and that

they are kept up to date, as well as for producing

an associated hazard assessment for the worksta‐

tions affected.

WARNING!
Acid and chlorine products
Cause: Never bring together acid and chlorine

products, like sodium-calcium hypochlorite as this

will produce a toxic chlorine gas.
Possible consequence: Fatal or very serious inju‐

ries from chlorine gas.
Action: refer to the current safety data sheets for

the feed chemicals.

CAUTION!
Wear suitable protective equipment (gloves, pro‐

tective goggles...) when commissioning.
Refer to the latest safety data sheets on the feed

chemicals.

NOTICE!
Close the sampling tap otherwise sample water will

escape.

The service technician is responsible for instructing

the operating and maintenance personnel during

commissioning.

If power sockets are available on the metering

system, then the socket on the same side as the

metering pump should always be used. The power

socket is controlled so that it switches the pump

which is installed on the same side as it.

Preparation:

Start up

 

 

 

30

Содержание DULCODOS Pool Comfort





















































































Отзывы:

Нет отзывов