Promega Maxprep AS9100, Руководство по эксплуатации

Страница: 26 / 118

24
Maxprep™ Liquid Handler | TM509 | Revised 1/19
Setting Up the Maxprep™ Liquid Handler
3.2 Switching On the Maxprep™ Liquid Handler
The Maxprep™ Liquid Handler has two power switches: a rocker switch that is located next to
the power cable connection behind the right access hatch, and a power button located on the
right front side of the instrument. After installation, the rocker switch behind the right access
hatch should be left in the on position.
Press the power button on the right front side of the Maxprep™ Liquid Handler to turn the
instrument “ON” (Figure 6). After turning the instrument on, wait at least one minute after the
green light on the gantry bar code scanner is illuminated before starting the Maxprep™
Application Software or any methods. Press the PC power button to turn the PC “ON”. Start the
Maxprep™ Application Software by double-clicking the icon on the PC desktop.
Figure 6. On/Off Switch.
3.3 Shutting Down the Maxprep™ Liquid Handler
1. Shut down the Maxprep™ Software by pressing the X in the upper right corner of the user
interface.
2. Turn the Maxprep™ Liquid Handler “OFF” by pressing the power button on the right front
side of the instrument.
3. Shut down the PC using the Windows
®
10 shut down procedure: touch the Windows
®
Start button in the lower left corner of the screen, select the power icon from the left side of
the Start menu, and select Shut Down .
4. When not in use for a prolonged period of time, the PC should be unplugged.
3.4 Configuring the PC
Your Maxprep™ Liquid Handler is controlled by Maxprep™ software running on a PC with a
touch-screen monitor. The PC should be configured to meet the needs of your site, including
adding users, specifying access-levels for users, connecting to a network and adding network
printers. Instructions for configuring the PC can be found in the Appendix of this user manual.
14839T
A