30/1
8
NOTICE D’INSTRUCTIONS GENERALE POUR
COFFRETS ET ARMOIRES ELECTRIQUES
V3.0
Page 30 / 51
Complete and adapt those recommandations, if needed, by adding others securities and/or controls
according to the working conditions of the refrigerating equipment.
Make operations as mounting, commissioning, repairing and maintaining of the equipment by qualified
and certified professionnals according to the following document, according to EN 378, EN14276,
EN13136, EN 13313, EN 60204, EN 61000 and EN 60335 standards, to European Directives, to
security rules generaly used, to best practices, to local regulations, by taking into account the possible
evolutions of all those topics.
Inform the final customer about the use, the maintenance, and the follow-up requirements of the
refrigerating installation.
The installer must respect the usual « best practises » concerning transportation and handling of
control panels, as indicated in the present document, especially on chapter 4 & 5.
The control panels must be installed in a place with sufficient ventilation, according to standards
and rules, due to the fact that they will generate heat in operating configuration.
Profroid disclaims all liability in case of modification(s) or repair action(s) done in case of modifications or repair of these
equipments without prior consent.
Equipments are exclusively aimed at being used by professionnal people, refrigeration conditions within their operating limits.
Technical features and operating limits are indicated in the electrical diagram on page OP10 and OP11.
Each installation must be defined and used according to operating limits which must never been exceeded and according to the
features initially defined.
Profroid is not liable for any operations of mounting, commissioning, repairing, maintaining which
are not done according to this document.
The internal connections inside the control panels, being subject to important
vibrations during transportation, will need to be tightened systematically at the
arrival of the Profroid equipment on site, before any power ON.
If the main switch of the control panel is equipped with a security coil, to switch OFF
automatically, the installer must implement the mounting and wiring of the necessary emergency
stop button(s) according to the standards, in order to provide to the safety teams a remote
switch OFF function of the main power supply.
