7/21
The periodic technical checks must be made following frequencies determined by standards, sound engineering practice, end user
and installer.
Report periodic checks and analyze the data. In case of abnormalities or inconsistencies, determine the cause and correct it.
In case of hanged units (evaporator as an example), it is necessary to define an exclusion zone on the ground, to avoid the
presence of persona under the equipment.
It is important to ensure that the hinge mechanisms of moving parts are operational before all manipulations (drain pan, door, fans
mounted on hinges…).
In general, when opening any moving parts it is necessary to accompany them or slow their opening speed to avoid casing
deformations.
Lockable fan switch aren’t safety accessories.
RECYCLING
Before disassembling all or part of a device, make sure that the power supply has been switched off.
Recover for recycling by means of appropriate tools the refrigerant present in the unit or in the area of intervention after isolation
of it.
Collect all used oil and deposit it in the appropriate recycling centers. Remember to drain the oil separator.
Eliminate all or part of the device in a suitable recycling center
