29/1
8
NOTICE D’INSTRUCTIONS GENERALE POUR
COFFRETS ET ARMOIRES ELECTRIQUES
V3.0
Page 29 / 51
16)
SAFETY RECOMMENDATIONS
As a good professional, the installer must:
Define the equipment operating conditions, according to the installation he is in charge of. This
equipment is designed to be integrated in machines according to the following directives :
Machinery Directive : European Directive 2006/42/CE
Low voltage Directive : European Directive 2006/95/CE
•
EN 60204-1 : Machinery security –
Electrical machines equipment - Part 1 :
general features.
EMC
Directive
(Electro
magnetic
compatibility)
:
European
Directive 2004/108/CE
•
EN
61000-6-1 :
generic
norme
about
immunity on residential environnment
•
EN 61000-6-2 : generic norme about
immunity on industrial environnement
•
EN 61000-6-3 : generic norme about
emissivity on residential environnement
•
EN 61000-6-4 : generic norme about
emissivity on industrial environnement
Commissioning of the equipment is allowed only if it has been incorporated in machines, that comply completely with the current
legal rules.
The installer must also :
Very important : before working on the equipment, the main power supply must be
powered OFF. It is up to the technician to make the necessary consignments.
Warning : Some equipments which contain condensators may remain electrically loaded even after
power off (frequency converters, soft starters…)
Warning : In some control panels, part of the equipments can be powered by an external supply.
In such case, even after power off and consignments of the power supply of the control panel,
some part may remain active in the enclosure. This case is clearly mentioned on the doors of the
control panel.
