71
>>
FITTING THE COPING
Figure 53
w
Read the installation
manual carefully
and pay scrupulous
attention to
the instructions
concerning wiring. In
case of doubt, call a
professional.
CAUTION
w
Note the distribution of the various modules constituting the coping of your pool,
arrange them leaving a gap of approx 10 mm between each two modules and
ensuring an even overlap around the inner periphery of the pool. (+/- 30 mm).
w
Screw them onto the metal plates using the screws 6x20 (bag G).
w
Clip the junction strips into position (see page 72).
>>
THE UNDERWATER LIGHTS
w
To fi nalise installation of the underwater lights, refer
to the installation instructions enclosed with the
underwater light and the control panel.
Once the underwater lights have been installed,
continue fi lling the pool until the water level is
2/3 of the way up the skimmer mouth.
Figure 54
Figure 55
POOL 3X6
POOL 4X8
