Proceq ZEHNTNER ZGM1120, Техническое руководство

Страница: 19 / 35

18. May 2021
© Copyright 2020, PROCEQ SA 15
6.2.7 Parameter „AngleBinary“
This parameter includes information for which geometry or geometries actions are
accomplished. The parameter corresponds to a binary coded integer number and is codified
as follows:
A3 A2 A1
Integer
value
0 0 1 1
0 1 0 2
0 1 1 3
1 0 0 4
1 0 1 5
1 1 0 6
1 1 1 7
A1, A2, A3 = angle
A1 always denotes the smallest angle looked at from the perpendicular to the measuring plane.
Considering a three angle glossmeter device with geometries of 20° / 60 ° / 85°, A1 would be
20°, A2 = 60° and A3 = 85°.
If the command MeasureValue() only measures, for example, the angles 1 and 3, the value of
the parameter is AngleBinary = 5!
6.3 Commands
6.3.1 Command MeasureValue()
This command initiates a gloss measurement in the measuring head.
MeasureValue(SerialNo, TID, AngleBinary, Count, isTemp)
OP-Code: 01
Parameter:
SerialNo 9-digit serial number with preceding blank
TID 2 character transaction number of the host
AngleBinary
Indication of the angle(s) that has to be measured
Binary coded integer number: {A1 = 2^0, A2 = 2^1, A3 = 2^2}
Count This value is always 1!