Proceq ZEHNTNER ZGM1120, Техническое руководство

Страница: 11 / 35

18. May 2021
© Copyright 2020, PROCEQ SA 7
5 Operation and handling ZGM 1120
Operation and control of the ZGM 1120 is done by using the included GlossTools measuring
and examination software.
Do not connect the glossmeter to your PC unless all installation steps of the
“GlossTools” software package have been performed.
5.1 Calibration

Start GlossTools software.

Insert the ZGM 1120 from the top into the supplied calibration standard until it locks
audibly.

Carry out the calibration according to the instructions of the „GlossTools“ manual.
To ensure precise and valid results the ZGM 1120 must be calibrated by the user on
the calibration standard in regular intervals (recommended interval: every 2 days).
The standard has been measured in the factory and marked with the serial number of
the instrument.
5.2 Measuring procedure

Position the unit on the surface to be measured so that it bears evenly.