Usage instructions SPEEDY 4all & 4you & 4teen
29
Figure 64: M5 fixing screws and elongated holes of
the side section mounts (SPEEDY 4all Ergo and -
4you Ergo)
Now the mounting bar (with SPEEDY 4all, -
4you and -4teen) or the front and rear side
section mounts (with SPEEDY 4all Ergo and -
4you Ergo) can be moved into position along
the elongated holes of the clothing guard and
the mounting bar or the side section mounts.
On the Ergo models, it must be ensured that
the side section mounts can be smoothly in-
serted back onto the back joint shaft and into
the side section mount.
Finally the clothing guard mounts are posi-
tioned accordingly and the M5 fixing screws
(AF 3 mm) are screwed back into the clothing
guard mounts with 6 Nm.
Figure 65: Slots of the clothing guard
20.4 Ergo models: adjusting the force
required for removing and in-
stalling
The following instructions are intended
for and may only be carried out by a rehabilita-
tion specialist dealer or PRO ACTIV
To make the removal and installation of the
clothing guard easier or more difficult, adjust-
ments can be made on the "bolted side section
mount". In doing so, there are three options for
adjusting the intensity of the pulling or pressing
force required for removing and installing the
clothing guard.
Figure 66: M6 pressure piece screwed into "basic
body of side section mount"
If the front side section mount has too much or
too little play in the "side section mount, bolt-
ed", it can be adjusted using the
M6 pressure
piece
in the basic body of the side section
mount. To reduce the play in the front side
section mount, screw the M6 pressure piece
(AF 3 mm) in a little more by turning to the
right. To increase the play, turn anti-clockwise
to unscrew the M6 pressure piece (AF 3 mm)
slightly.
Figure 67: Back side of the sprung pressure piece
with slot
Figure 68: Front side of the sprung pressure piece
with ball
Slots of the clothing guard
M5 fixing screws
Slots of the
side section mount
Side section mount basic body
M6 pressure
piece
Side section
mount, bolted
