Printronix T5000 Series, Руководство пользователя

Страница: 188 / 312

188
Chapter 3
Emulation Submenus
PSeries Dbl High
(From page 146.) This menu option allows printing compatibility between the
current and older models of Printronix printers.
•
Normal. This is normal Double High printing for current model printers.
•
P3/4/6/9 Compat. Where older printers printed two dot rows higher, this
option allows for compatibility by raising the print two dot rows to match
the current models dot row value (two dot rows lower).
The factory default is Normal.
Repeat Form Opt
(From page 141.)
•
Enable. Speeds up the processing of repeated forms for PGL, thereby
resulting in increased printer throughput. This option provides no speed
benefit for forms that are unrelated to one another and should be disabled
under those circumstances.
•
Disable. Should be selected when subsequent forms are unrelated to
one another.
The factory default is Enable.
Reset Cmd CFG Ld
(From page 147, page 149, page 151, page 153, page 155.)
When the printer receives a host data stream reset command (ESC @ or
ESC[K) in addition to resetting printer variables, the selected configuration is
loaded.
•
Disable. The active emulation parameters are loaded when the reset
command is executed.
•
Power up config. The power-up configuration is loaded when the reset
command is executed.
•
Current config. The currently selected configuration is loaded when the
reset command is executed.
•
Factory config. The factory installed configuration is loaded when the
reset command is executed.
The factory default is Disable.
Right Margin
(From page 145, page 148, page 150, page 152, page 154.)
Set in characters. Character zero is defined as the far right edge of the page,
and column numbering increments from right to left.
The range is 0-369 characters, and the factory default is 0 characters.