Primus Wind Power Air 30 Скачать руководство пользователя | Manualshive

Страница: 16 / 54

background image

AIR 40, AIR Breeze, AIR 30, AIR X MARINE and AIR SILENT-X are trademarks of Primus Wind Power 2013 Primus Wind Power Inc.

AIR Owner’s Manual

3-CMLT-2020-A

16

AIR WIND TURBINE TOWERS

1. The AIR wind turbine mounts on tubing with a nominal 1.875 – 1.900

inch outside diameter.

2. Typical tower construction use: 1 1/2 inch Schedule 40 steel pipe or 2 inch

SS-20 galvanized fence tubing (0.090 inch wall thickness) or equivalent.

3. DO NOT use plastic pipe to construct a tower or electrical conduit.

LAND TOWER OPTIONS

Primus Wind Power offers a number of tower choices for your AIR wind turbine.

The following section provides a summary of the available tower kits. User manuals

for the towers and tower kits are available online and you are encouraged to review

them in order to make the most informed tower selection.

27 ft (8.3 m) Tower Kit

The 27 ft (8.3 m) Tower Kit includes a tower clamp/guy wire assembly and all neces-
sary hardware and fasteners to erect a 27 ft tilt-up tower using Schedule 40 steel pipe
or tubing with an outside diameter of 1.875 inch. See Fig. 3.

Note: Anchors and tubing are not furnished with the kit.

29 ft (8.8 m) EZ – Tower

The 29 ft (8.8 m) EZ Tower is a complete kit that includes all materials required to as-
semble a 29 ft guy wire tilt-up tower. Anchors, guy wire assemblies, galvanized steel
tubing and all fasteners. See Fig. 4.

Fig. 4. 29 ft (8.8 m) Tower Kit

IMPORTANT:

User manuals for towers and tower kits are available online a

www.primuswindpower.com. Primus Wind Power recommends reviewing

them to make an appropriate tower selection for your

AIR wind turbine.

«
...
14
15
16
17
18
...
»

Содержание Air 30























































Отзывы:

Нет отзывов

Похожие инструкции для Air 30

Бренд: MT-Propeller Страницы: 97

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды