PRIMERGY BladeFrame BF200, Инструкция по первоначальной настройке

Страница: 36 / 115

Initial Setup Guide cBlade ES
2-16 Release 5.0
• Ensure that the anti-tilt bracket is correctly mounted when you
set up the rack.
• For safety reasons only one unit may be withdrawn from the
rack at a time when performing assembly or service work.
• If more than one unit is withdrawn from the rack at any one time,
there is a danger that the rack will tilt forward.
• The power connection for the rack must be installed by an
authorized technician (electrician).
• If the rack model is integrated in an installation that receives
power from an industrial (public) power supply network with
the IEC309 connector, the (public) power supply protection
must comply with the requirements for the non-industrial
(public) power supply networks for the type A connector.
• The power supply for the rack should be divided amongst the
three phases of a three-phase power connection.
Environmental
Protection Environmentally friendly product design and
development
This product has been designed in accordance with standards for
”environmentally friendly product design and development“. This
means that the designers have taken into account important criteria
such as durability, selection of materials and coding, emissions,
packaging, the ease with which the product can be dismantled and
the extent to which it can be recycled.
This saves resources and thus reduces the harm done to the
environment.
Notes on saving energy
Devices that do not have to be on permanently should not be
switched on until they need to be used and should be switched off
during long breaks and on completion of work.