PRIMERGY BladeFrame BF200, Инструкция по первоначальной настройке

Страница: 107 / 115

Making Network and SAN Connections
Release 5.0 5-29
Checking the Date, Time, and Time Zone
The date, time, and time zone on your Control Blades were set
when the Control Blade operating system and PAN Manager were
installed. Before using your BladeFrame BF200, check these
settings to make sure they are correct for your location, or configure
the Control Blades to obtain a time setting from external Network
Time Protocol (NTP) servers.
Modifying the
Date, Time, and
Time Zone To ensure that the system hardware clock is set correctly, log on to
a cBlade and enter the following:
# /sbin/hwclock --show
This prints the current settings for the date and time.
To change the date or time setting:
1. Enter the date command in the following format:
#
date [
MMDDhhmm
[[
CC
]
YY
[.
ss
]]]
where:
Variable: Indication:
MM Month
DD Day
hh Hour (24-hour clock)
mm Minutes
CC Century, such as 20 in 2001
YY Year, such as 01 in 2001
ss Seconds