PRIMERGY BladeFrame BF200, Инструкция по первоначальной настройке

Страница: 23 / 115

Site Preparation
Release 5.0 2-3
Figure 2.1 BladeFrame BF200 Dimensions
Operating
Requirements The BladeFrame BF200 is not a free-standing unit; you must
provide an EIA standard 19-inch rack into which you can install the
BladeFrame BF200. Each BladeFrame BF200 is 13U-high; up to
three BladeFrame BF200 units can be installed in a 42U-high rack.
Each BladeFrame BF200 requires additional space at the front and
rear for operation and servicing. At the front, approximately three
feet is required to allow an installer to insert the blades. At the rear,
approximately six inches is required to provide enough space to
reach the circuit breaker. See
Figure 2.2 .