MULTI-VARIABLE MONITOR - MANUAL
3 | MVM – Manual | AntecControls.com
INTRODUCTION
General
In this manual, you will find information regarding:
•
Multi-Variable Monitor (MVM) Specifications
•
How to install the MVM
•
Detailed description of MVM display navigation and
configuration
•
Troubleshooting information
Product Overview
The Multi-Variable Monitor (MVM) is a touchscreen monitor that
can be used to display and adjust settings from multiple devices
on a BACnet network. The MVM supports both BACnet MS/TP
and BACnet IP to connect with room level devices.
Some of its key features include:
•
Easy-To-Use interface
•
Displays any BACnet point including alarm status, room
temperature, humidity, room pressure, air change per hour,
and occupancy
•
Connects with multiple devices in order to display critical
information for multiple rooms
•
Audible alarms available locally and remotely
•
Password protection to change room settings
Technical Specifications
MVM Size
7”
15”
Dimensions
8.8 in. (223 mm)
×
6.4 in. (162 mm)
×
2.6 in. (65 mm)
15.5 in. (394 mm)
×
12.5 in. (318 mm)
×
2.6 in. (65 mm)
Display Type
Capacitive touch, 7.0 in. (178 mm), TFT, dimmable
Capacitive touch, 15.0 in. (381 mm), TFT, dimmable
Resolution
800 px
×
480 px, 262144 colors
1024 px
×
768 px, 262144 colors
Input Power
24 VAC, 14 VA, Class 2
24 VAC, 25 VA, Class 2
Environmental (Operating)
50°F to 105°F (10°C to 40°C), 10% to 90% R.H. (non-condensing)
Communication Protocol
BACnet MS/TP, BACnet IP
Face
Glass, IP54
CAUTION
This mark indicates an important point for the proper
function of
the MVM.
Improper setup may cause unit
failure. Pay close attention to all caution points
throughout this manual.
For local area support, please
contact your local Antec Controls
Representative
For more information visit
www.AntecControls.com
