MULTI-VARIABLE MONITOR - MANUAL
16 | MVM – Manual | AntecControls.com
Connection Instructions
The following steps will allow the user to connect to a Multi Variable Monitor (MVM)
STEP 1
Open the Ethernet settings on your computer and select
Change
adapter options.
STEP 2
Select the Ethernet port to which the MVM is connected.
NOTE:
In this case Ethernet 2 is selected. The Ethernet port may
be different on the user’s computer. Ensure to configure the
settings for the Ethernet port to which the MVM is physically
connected.
STEP 3
In the Ethernet status menu select
Properties.
