MULTI-VARIABLE MONITOR - MANUAL
19 | MVM – Manual | AntecControls.com
STEP 9
Select the
Connection drop down at the top of the screen and
select
Connect to Device.
STEP 10
Ensure that
Use HTTP connection is selected.
Enter the IP address that was recorded from the TCP/IP menu of
the MVM in STEP 6.
Enter the Admin Password:
loytec4u
NOTE:
This password will be saved and only needs to be
entered the first time you connect to an MVM.
STEP 11
The status bar will display “Loading Dynamic Points List” and
then display “DP Connection, 10.0.42.13” once you have
successfully connected.
NOTE:
The user’s IP address will be different than what is used
here.
