PREVOST H 2018 Series, Руководство оператора

Страница: 74 / 258

4-32 CONTROLS AND INSTRUMENTS
PA1628 H3-41, H3-45 Operator’s Manual
•
Press while in a Menu to confirm the selected
action.
17. CD slot
•
Insert/Remove CD
NOTE
Using phone when driving is not
recommended. For this reason, there are no
microphones installed on the radio at the
factory.
NOTE
The driver speakers are controlled from the
dashboard radio volume knob while the
passenger’s area speakers are controlled from
the VSS-05 Sound Selector volume knob.
See the owner manual for more information
about how to use the radio. This manual is
available on the technical Publications web site
at https://techpub.prevostcar.com/en/. Select
Supplier Publication tab and select Delphi in the
list of supplier’s name for a faster search.
HVAC CONTROL UNIT
The vehicle is slightly pressurized by the central
HVAC system to prevent dust and moisture from
entering. Air flow and controls divide the vehicle
into two areas: driver’s area with defroster and
passengers’ area.
22276
Fresh air is fed in each area and has a separate
return air and discharge air duct.
NOTE
To operate the air conditioning system when
stationary, run engine at fast idle. When the
system is running, keep windows and door
closed.
To prevent battery run-down, the central A/C
and heating systems will not operate if the
charging system is not working properly.
When the A/C system is running, park at least 4
feet (1,5 m) from other vehicles or buildings to
allow sufficient air flow through the condenser
core.
Separate driver and passenger heating,
ventilation and air conditioning controls are
located on this panel. To operate, the vehicle’s
engine must be running.
The driver’s and the passengers’ units may be
turned ON by pressing the following button:
Also, the driver's HVAC section turns on
automatically at starting of the engine and uses
the settings that were kept in memory before
turning off of the system.
The A/C compressor starts automatically
when the two following conditions are
satisfied:
1.
The outside temperature is above 32
°F
(0°C).
2. The passenger's area temperature has
reached 7°F (4°C) under the set point.
NOTE
Upon starting, if the outside temperature is
above 32
°F (0°C) and then drops below
32
°F
(0°C), the compressor will keep running up to a
temperature of 15°F (-9°C) to prevent
condensation from forming on the windows.
All parameters set before turning the system
OFF will be kept in memory for the next power
ON.
Heating Mode Indicator
22135
This red LED illuminates when
system is heating.