PREVOST H 2018 Series, Руководство оператора

Страница: 51 / 258

CONTROLS AND INSTRUMENTS 4-9
PA1628 H3-41, H3-45 Operator’s Manual
NOTE
The
CRUISE
switch and
RESUME
button do not
operate at speeds below 30 mph (50 km/h).
CRUISE CONTROL BUTTONS
SETTING AT A DESIRED SPEED
Accelerate the vehicle to the desired cruising
speed using the accelerator pedal. Press and
release the
SET
button then remove foot from
the accelerator pedal. This will set the vehicle
cruise speed and store it in memory. The set
speed will appear in the driver information
display.
INCREASING SET SPEED
The vehicle cruise speed setting can be
increased by one of the following methods.
1. Accelerate using the accelerator pedal until
the desired cruising speed is reached. Press
and release the
SET button.
or
2. Press and hold the RES (RESUME) button
until the desired cruising speed is reached.
When the
RES button is released, the new
cruising speed will be stored in the cruise
control memory.
or
3. When driving with cruise control, each time
the
RES
button is momentarily depressed,
the cruising set speed is raised by 1 mph (2
km/h).
NOTE
When driving with cruise control, the vehicle
can still be accelerated by depressing the
accelerator pedal in the usual manner. Once
the accelerator pedal is released, the vehicle
will return to the previously set cruising speed.
DECREASING SET SPEED
The vehicle cruise speed setting can be
decreased by one of the following methods.
1. Press and hold the SET button until the
desired cruising speed is reached. When the
SET button is released, the new cruising
speed will be stored in the cruise control
memory.
or
2. Each brief pressing of the
SET
button will
decrease set cruising speed by 1 mph
(2 km/h).
or
3. Slightly apply the service brake and when
desired cruise speed is reached, press and
release the
SET button.
CANCELING THE SET SPEED
You can cancel the set cruising speed by:
1. Pressing momentarily the CANCEL button;
2. Depressing the brake pedal.
RESUMING SET SPEED
If the set speed is cancelled by pressing the
CANCEL button or depressing the brake pedal,
pressing the RES (RESUME) button will restore
the speed set prior to cancellation, providing
that your speed is above 30 mph (50 km/h).