background image

3-10    COACH INTERIOR     

PA1628 H3-41, H3-45 Operator’s Manual 

Fixed Windows 

These windows are mechanically attached to the 
structure and cannot be opened. 

Emergency Windows 

These windows can be opened from inside the 
vehicle as emergency exits. A decal on window 
sills indicates the location of the emergency 
windows. To open an emergency window, lift the 
window release bar (sill) and push the window 
open from the bottom. 

 

EMERGENCY WINDOW 

18391

 

To close, lift the release bar and pull the window 
into position.  Push down on release bar to lock 
the window shut. 

For more information on emergency features, 
refer to Section 7 

Safety Features and Equipment

Window Sun Shades 

Passenger windows may be equipped with pull-
down sun shades.  To operate, pull down the 
shade and insert the hem into the first or second 
catch. To retract pull out from the slots and guide 
the shade back up. 

 

PASSENGER SUN SHADES 

23130

 

DRIVER’S POWER WINDOW 

The driver has a power window on the left side of 
the coach.  The window is controlled by a rocker 
switch located on the lateral control panel.  Refer 
to Section 4 

Controls & Instruments

Driver’s window shades 

Two electrically-operated shades are installed 
behind the windshields. Two rocker switches on 
the dashboard operate each shade individually.  
Refer to Section 4 

Controls & Instruments

 for 

more information. 

 

CAUTION

 

The electric shades should only be operated 
electrically. Pulling down manually may 
damage the mechanism. 

This vehicle is provided with a spring release type 
sun shade on the driver’s left side window. 

 

Another spring release type shade is available on 
the optional driver’s guard. To operate, pull down 
the shade by its hem to the appropriate position 
and release. It will remain in position.  To raise, 

Содержание H 2018 Series



































































































































































































































































Отзывы:

Похожие инструкции для H 2018 Series