PREVOST H 2018 Series, Руководство оператора

Страница: 146 / 258

5-32 OTHER FEATURES
PA1628 H3-41, H3-45 Operator’s Manual
2. Push selection button (3) or (6) until setting
sign (C) is blinking.
3. Push enter button (5) to show the adjusted
operating time.
4. Push selection button (3) or (6) to adjust the
operating time.
5. Push enter button (5) to confirm the
operating time and to show standard
display.
Adjust Remaining Time
The remaining time is the period, when the
preheater remains ON after ignition is switched
OFF.
If the ignition is switched OFF while the preheater
is ON, the remaining time can be adjusted.
1. Push selection button (3) or (6) to adjust
remaining time.
2. Push enter button (5) to confirm.
Preheater stops automatically after remaining
time is over. The remaining time will not be
saved. It has to be adjusted and confirmed every
further time. If the remaining time is not
confirmed within 10 seconds, the preheater
stops.
Set A Starting Time
1. Push menu-button (2) to show menu row at
the top of the display (1).
2. Push selection button (3) or (6) until setting
sign (A) is blinking.
3. Push enter button (5) to make starting time
number to appear.
4. Push selection button (3) or (6) to browse
the starting time numbers.
5. Push enter button (5) to choose the starting
time you wish to setup: display shows day
and time and next step day can be adjusted.
6. Push selection button (3) or (6) to adjust
day.
7. Push enter button (5) to confirm day.
8. Push selection button (3) or (6) to adjust
hours.
9. Push enter button (5) to confirm hours.
10. Push selection button (3) or
(6) to adjust minutes.
11. Push enter button (5) to
confirm minutes: standard
display appears.
Only in 12h-mode after adjustment of time:
12. Push selection button (3) or (6) to switch
between AM and PM.
13. Push enter button (5) to
confirm: standard display
appears.
NOTE
Seven starting times are available for a period
of seven days, but only one starting time can
be active.
For safety reasons a starting time can only be
activated for the same or next day.
Activation for Sunday and Monday is possible
on Friday; activation for Monday is possible on
Saturday.
Activate Starting Time
1. Push menu-button (2) to show menu row at
the top of the display (1).
2. Push selection button (3) or (6) until
activate start sign (B) is blinking.
3. Push enter button (5) to confirm.
4. Push selection button (3) or (6) to browse
starting times (programmed days and times
appear in the display according to the
starting time number).
5. Push enter button (5) to
activate the chosen
starting time: activated
starting time and the
chosen number appear in
the display.
Deactivate Starting Time
1. Push menu-button (2) to show menu row at
the top of the display (1).
2. Push selection button (3) or (6) until
deactivate start sign (B) is blinking.