PREVOST H 2018 Series, Руководство оператора

Страница: 161 / 258

OTHER FEATURES 5-47
PA1628 H3-41, H3-45 Operator’s Manual
SEATS RECONFIGURATION
To accommodate a wheelchair, one row of seats
must be folded and two rows must be folded
and slid away. Seats may be folded on both
sides of the coach to make room for a second
wheelchair.
POSSIBLE SEATING ARRANGEMENT
Electrical wheelchair or tri-wheeler may require
moving the sliding seats on both sides of the
coach to allow enough turnaround space.
FOLDING AND SLIDING SEATS
To fold a set of seats, raise the seat back then
lift up the seat cushion (pull on lever 1). To slide
a row of seats, remove the black covers from the
floor tracks. Pull the lever 2 while sliding the
seat along the track.
WHEELCHAIR RESTRAINT SYSTEMS
Two types of wheelchair restraint systems may
be found, depending on the type of seats:
1. 4-point wheelchair and occupant
securement with floor anchorage.
2. 4-point wheelchair and occupant
securement with anchorage to
passengers seat pedestals.
Refer to Q’Straint publications included in the
wheelchair restraint plastic pouches for further
details.
4-POINT SECUREMENT WITH FLOOR
ANCHORAGE
This securement system includes:

4 wheelchair tiedown retractors to secure
wheelchair to vehicle floor.

Occupant securements: lap and shoulder
belts that integrate to the rear wheelchair
restraints.

Floor anchorages; installed on the vehicle
floor.
Two complete sets of wheelchair restraints are
kept in plastic pouches and stowed in an
overhead compartment. To secure each
wheelchair, four tiedown retractors must be
used (at all four corners).
Two of the four tiedown retractors have
attaching pins to secure the occupant’s lap belt.
They must be placed at the rear of the
wheelchair. Each tiedown retractor slots into a
mounting floor pocket.
WHEELCHAIR ANCHORAGE SYSTEMS 23266
To anchor the retractors, lift the floor pocket
cover, push in the retractor anchor then slide it
until it locks in place. Hook one wheelchair
restraint belt to each corner of the wheelchair
frame
(not the wheels) and allow the retractors
to tension the belts.