PREVOST H 2018 Series, Руководство оператора

Страница: 225 / 258

TECHNICAL INFORMATION 9- 13
AXLES
I-BEAM FRONT AXLE

Dana Spicer model S84V with forged “I” beam

Reverse Elliot type

Unitized wheel bearings (maintenance free)

Factory pre-adjusted caster
FRONT AXLE IFS (INDEPENDENT FRONT
SUSPENSION)

Prevost independent front suspension with
recalibrated air springs for improved comfort
 Wide apart double A-arm design mounted on
ball joints with torque link
 Double sealed taper roller bearings bell crank
and idler steering arm
 Unitized wheel bearing (maintenance free
bearing)

Factory pre-adjusted caster
DRIVE AXLE

Meritor model RC23-165

Full floating banjo type

Oil lubricated wheel bearings

Factory pre-adjusted caster
TAG AXLE

Prevost hollow square beam

Unitized wheel bearings (maintenance free)
SUSPENSION
Goodyear rolling lobe type air springs (bellows)
are used throughout
I-BEAM FRONT AXLE

2 Bellows (12”)

2 Shock absorbers

4 Radius rods

1 Transverse radius rod

1 Height control valve

1 Anti-roll bar, 2” diameter
INDEPENDENT FRONT SUSPENSION (IFS)

2 14-inch Bellows for a G.A.W.R. of 19 000 lb

2 Shock absorbers

2 Upper A-arms

2 Lower A-arms

2 Torque rods

2 Steering Levers

1 Height control valve

1 sway bar (1¾
"
diameter)
DRIVE AXLE

4 Bellows (11”)

4 Shock absorbers

3 Radius rods

1 Transverse radius rod

2 Height control valves

1 Anti-roll bar, 1½” diameter
TAG AXLE

2 Bellows (12”)

2 Shock absorbers

3 Radius rods

1 Transverse radius rod