2. Position the front stabilizer onto the frame and secure using the two 6 mm hex key sta-
bilizer mounting bolts (2x) and washers (2x) , torque to 15.6 ft-lbs (21 N•m).
CAUTION
: Do not over tighten fasteners. The bolt heads can snap off if over
tightened.
3. Reinstall the two stabilizer leveling feet.
4. Return bike to the upright position.
5. Make sure the bike is level and setting firmly on the floor, see
6. Verify bike operation per the
"Operation Verification" on page 7
check list and return to
service.
See Also
"Rear Stabilizer Replacement" on the next page
"Bike Leveling Adjustment" on page 27
117
Содержание Spinner Chrono
