6. Tighten the Brake Rod Assy - Fixed Nut Bushing.
7. Set the resistance to minimum.
8. Start pedaling the bike greater than 55 rpm while increasing the resistance level to max-
imum and returning to minimum resistance.
l
Verify smooth resistance operation from minimum to maximum levels.
l
Verify that at maximum resistance, the pedal resistance was very strong.
l
Verify that there were no unusual noises from the brake pads during this oper-
ation.
9. While riding the bike, stop pedaling and firmly press down the resistance knob. Verify
that the flywheel immediately slows down and stops rotating.
10. Verify the bike operation per
"Operation Verification Checklist" on page 7
and return to
service.
See Also
"Replacement Procedures" on page 28
111
Содержание Spinner Chrono
