background image

indoor bicycle trainer 

  

LR961

instructions manual

(ver.1.0 2017/1)

Applicable Tire Diameter Capacity:

Gravity Mode :   570 – 710mm

 

 

 

(22 – 29-inch)

Fixed Mode :  

610 – 710mm

 

 

 

(26 – 29-inch)

Contact

If  you need support, please first contact the shop you purchased this product from or contact 

the distributor in your country for assistance. A list of  our distributors can be found here: 

http://www.minoura.jp/english/support/shop/distributor.html.

If  you need further support, contact us at one of  the places listed below.

Dual Mode

The LR961 can be used as a gravity trainer or a fixed position trainer by operating the lock 

lever.

Fixed Mode

 acts like a traditional trainer where the trainer stays in the same position and 

the rear roller compresses the tire to achieve resistance. This is good for power training.

Gravity Mode

 supports the bicycle frame by the axle allowing the bike to move up and 

down. Your body weight dictates contact with the roller naturally so no adjustment is needed 

no matter what bike or tire you use. This also extends tire life.

MINOURA North American Tech Center 

 

MINOURA Japan Headquraters

(for U.S. residents ONLY) 

    

(for ALL customers)

Hayward, California, U.S.A. 

 

 

 

 

1197-1 Godo, Anpachi, Gifu 503-2305 Japan

Phone:  1-510-538-8599  (8 am - 5 pm, Mon - Fri, PST)   

Phone:  +81-584-27-3131

Fax: 

1-510-538-5899  

 

 

 

 

Fax:   +81-584-27-7505

Email:   [email protected] 

 

 

 

Email:   [email protected]

 

 

 

 

 

 

 

 

Web:   www.minoura.jp

Made in Japan

Summary of Contents for LiveRide LR961









Reviews: