background image

indoor bicycle trainer 

 

instructions manual

Contact

MINOURA North American Tech Center 

 

MINOURA Japan Headquraters

(for U.S. residents ONLY) 

    

(for ALL customers)

Hayward, California, U.S.A.   

 

 

 

1197-1 Godo, Anpachi, Gifu 503-2305 Japan

Phone: 1-510-538-8599  (8 am - 5 pm, Mon - Fri, PST) 

Phone: +81-584-27-3131

Fax: 

1-510-538-5899     Fax: 

 

+81-584-27-7505

Email: 

 

[email protected] 

   Email: 

 

[email protected]

        Web: 

 

www.minoura.jp

MADE IN JAPAN

If  you need help, please contact the shop first where you originally purchased this product 

or call the distributors in your country. The distributors list can be found on our web site.

When you cannot get enough service, you can contact us;

(ver. 1.3 2014/2)

Applicable Tire Size Capacity:

 

any 24-inch – 700 x 45c

 

(ETRTO 47-622)

 

 

(Max Tire Outer Diameter = 714mm)

• The basic LiveRide series trainer combined with the simple & durable U-shaped design main frame and the powerful 

Advanced-Magturbo resistance unit

• Uses a super-strong Neodymium magnet for providing extremely wide and controllable resistance range

• Easy-to-grip wing design remote shifter enables to choose your desired power from 7 resistance levels easily

• Thick outer edge flywheel design generates more initial inertia rather than a plain disc type flywheel

• 'LiveTraining' smart phone training application compatible

Main Features

Please Note

This trainer must be used with a completely smooth (no knobs or raised tread) tire. 

Failure to do so will ruin the mag unit, your tire, and void any possible warranty.

Summary of Contents for LiveRide LR340









Reviews: