Precor M8.2E, Руководство пользователя

Страница: 36 / 43

page 30
5
Maintaining the M8.2E/L Personal Recumbent
Cycle Trainer
Because of its advanced design, the M8.2E/L recumbent cycle requires little
maintenance beyond periodic cleaning to keep it running smoothly and effi-
ciently. The information in this section provides instructions on how to clean the
recumbent cycle and obtain service.
WARNING: UNPLUG THE RECUMBENT CYCLE FROM THE POWER
OUTLET BEFORE PERFORMING ANY MAINTENANCE TASKS, SUCH AS
CLEANING.
Cleaning the Cycle
Clean the recumbent cycle base, seat, and seat post with mild soap or a
general household cleaner made for cleaning plastic and rubber. Do not use an
abrasive cleaner on the electronic console since it can scratch the surface.
Clean the surface of the electronic console with a clean, damp sponge or soft
cloth. Dry the surface thoroughly with a clean towel.
CAUTION: Do not spray or pour liquids on the electronic console and take
special care when cleaning the console display to avoid scratching its
surface.
Resetting the Circuit Breaker
If the display does not appear when you turn ON the recumbent cycle, turn the
cycle OFF. Next, check to see that the power cord is plugged into a power
outlet and the circuit breaker is aligned properly. If the circuit breaker has been
tripped, you will need to reset it by pressing down on the breaker switch.