Precision Drone Pacesetter 2015, Руководство пользователя

Страница: 22 / 60

•
If at any time you need to take control of the drone, for example to avoid an
imminent collision, flip the Flight Mode switch down to position 1 then back
up to position 0.
In the event that your Pacesetter hits failsafe in the middle of route, the route can be
continued once the drone returns home and the batteries have been replaced. To do
so, follow the steps below:
1) Remember the last waypoint that had been completed.
2) Clear the route that it had been on, and reload the same field.
3) In the Editor Window, select "Editing Mission". Set the last waypoint completed
as the starting waypoint.
4) Go to the last waypoint completed and set its turning mode to "Stop and Turn"
5) Upload the route to the Pacesetter and launch it.
5a) Make sure to take off manually and get it to altitude when doing this. The
drone will make a straight line to the continuation point and will hit any
obstructions in its way.
REMINDER: The drone will hit its Failsafe Return to Home voltage when it reaches
<14.5v. It will land in place once <14.0v has been reached. If you are flying manually
when this happens, the drone will take control from you. To take back control, flip the
Flight Mode Switch to position 1, then back to position 0. When failsafe is hit, the
drone will ascend to 40 meters if it is flying lower then this altitude.
1 22 Page 21