7 Set up
■
11
En
gl
is
h
7
Set up
7.1
Unpacking the balance
The balances are delivered in an environmentally-friendly package, specifically developed for this precision
instrument, which provides optimum protection for the balance during transportation.
In order to avoid damage, attention must be given to the following points when unpacking the balance:
• Unpack the balance carefully. It is a precision instrument.
• When outside temperatures are very low, the balance should first be stored for some hours in the un-
opened transport package in a dry room at normal temperature, so that no condensation settles on the bal-
ance when unpacking.
• Check the balance immediately after unpacking for externally visible damage. If you should find transport
damage, please inform your Services representative immediately.
• If the balance is not to be used immediately after purchase but only at a later time, it should be stored in
a dry place where fluctuations in temperature are as low as possible (see chapter 7.3 "Storage").
• Read through these operating instructions, even if you already have experience with balances, before you
work with the balance and pay attention to the safety recommendations (see chapter 6 "Safety").
7.2
Transport and shipping
Your balance is a precision instrument. Treat it with care.
Avoid shaking, severe impacts and vibration during the transportation.
Take care that there are no signification temperature fluctuations during the transportation and that the bal-
ance does not become damp (condensation).
7.3
Storage
If you would like to take the balance out of service for an extended period, disconnect it from the electricity
supply, clean it thoroughly (see chapter 20.4 "Cleaning") and store it in a place which meets the following
conditions:
• No violent shaking, no vibrations
• No significant temperature fluctuations
• No direct solar radiation
• No moisture
7.4
Choosing a suitable location
The balance location must be chosen in such a way as to guarantee perfect operation of your balance, so
NOTE
Retain the original packaging in order to avoid transportation damages when shipping or transporting the
balance and to allow the balance to be stored in the best conditions if it is out of operation for an extended
period.
NOTE
The balance should preferably be dispatched and transported in the original packaging to avoid transpor-
tation damage.
NOTE
The balance should preferably be stored in the original packaging, since this provides optimum protection
for the balance.
