■
9 Working with the configuration menu
22
9.7
Interface-functions
To activate the menu see Chapter 8.5 “Activating the two main menus” and Chapter 8.6 “How the menu
control operates”.
With the aid of the interface functions, the RS232/V24 interface of the balance is matched to the interface
of a peripheral device (see
Chapter 14 “Data transfer”).
The „PC DIRECT MODE“ enables/disables a direct communication with Windows PC‘s. The balance output
is directed to the PC like an entry from a PC keyboard.
9.8
Date and time
To activate the menu see Chapter 8.5 “Activating the two main menus” and Chapter 8.6 “How the menu
control operates”.
9.9
Password protection
To activate the menu see Chapter 8.5 “Activating the two main menus” and Chapter 8.6 “How the menu
control operates”
.
• SET INTERFACE
BAUDRATE
300
600
1200
2400
4800
9600
19200
38400
57600
Select baud rate
PARITY
7-EVEN-1STOP
7-ODD-1STOP
7-NO-2STOP
8-NO-1STOP
8-EVEN-1STOP
8-ODD-1STOP
Select parity
HANDSHAKE
NO
XON-XOFF
HARDWARE
Select handshake function
PC DIRECT MODE
ON/
OFF
Set PC direct mode
CHARACTER SET
ENG
GER
FRA
Select the character set fo the PC direct mode
according the keyboard which is used for the PC
FORMAT
LINES
TABLE
Select line or table data format according your
application
• SET
DATE AND TIME
DATE [DD.MM.YY]
TIME
[HH.MM.SS]
FORMAT
STANDARD
/US
Set date and time
NOTE
The date and time display continues in the event of a power failure. If this is not the case, the balance bak-
kup battery is exhausted and must be replaced by the customer service.
