Precisa LX 321 Скачать руководство пользователя страница 28

Страница: 28 / 44

10 Working with the application menu

■

Operation:

Start the application (see Chapter 10.3 “Changing application / weighing mode”).

• Place something on the weighing pan.

• Press the «

REF

»-button until the desired function flashes on the display.

• Release the «

REF

»-button.

10.9 Application «SUM»

See Chapter 8.5 “Activating the two main menus” and Chapter 8.6 “How the menu control operates” for the
activation of the application menu.

There is no Setup menu for this application.

With the aid of the „SUM” application, you can add individual weighings, without the balance being tared to
zero before each individual weighing.

Functions of the application:

Operation:

Start the application (see Chapter 10.3 “Changing application / weighing mode”).

• Place something on the weighing pan.

• Press the «

REF

»-button until the desired function flashes on the display.

• Release the «

REF

»-button.

10.10 Application «Animal weighings»

See Chapter 8.5 “Activating the two main menus” and Chapter 8.6 “How the menu control operates” for the
activation of the Application menu.

With the aid of the „ANIMAL” program you can weigh living animals accurately, even if they move on the
scale-pan.

The balance measures continuously throughout the period defined by the user in the Setup menu, averages
the stored values at the end of the measuring period and displays average-measurement thus obtained.

Functions of the application:

«INF»:

- Display of:

- Total weight
- Residual capacity
- Individual components

- Exit info with «

MODE

»-button.

«STO n»:

- Take stable value and add to the sum of the components.
- Short acustic confirmation

«WAIT i»:

Value not stabilized yet

«RES»:

- Reset

«INF»:

- Display of:

- Total weight
- Residual capacity
- Individual components

- Exit info with «

MODE

»-button.

• SETUP APPLICATION

ANIMAL

MEASURETIME

Enter time in seconds

«MANUAL»: - Manual release of the measurement.
«AUTO»:

- Start automatic release of the measurement with a second delay after each load-change.

«STOP»:

- Stop automatic measurement.

Содержание LX 321













































Результаты поиска

Содержание LX 321

Отзывы:

Похожие инструкции для LX 321

Бренды по названию

Популярные бренды

Precisa LX 321, Руководство по эксплуатации

Результаты поиска

Содержание LX 321

Отзывы:

Похожие инструкции для LX 321

Бренды по названию

Популярные бренды