Powtran JI500 Series, Руководство пользователя

Страница: 122 / 164

Chapter 5 Function parameter
118
Ch
ap
ter 5
8 Control power failure 28 Custom fault 2
9 Undervoltage 29 Power-on time arrival
10 Inverter overload 30 Off load
11 Motor Overload 31 PID feedback loss when running
12 Input phase loss 40 Fast current limiting timeout
13 Output phase loss 41 Switch motor when running
14 Module overheating 42 Too large speed deviation
15 External fault 43 Motor over-speed
16 Communication abnormal 45 Motor overtemperature
17 Contactor abnormal 51 Initial position error
18 Current detection abnormal - COF communication failure
19 Motor auto tuning abnormal
y1.03 Frequency of the third fault Frequency of the last fault
●
y1.04 Current of the third fault Current of the last fault
●
y1.05 Bus voltage of the third fault Bus voltage of the last fault
●
y1.06
Input terminal status of the third
fault
Input terminal status of the last fault, the order
is:
BIT9 BIT8 BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
DI1 DI2 DI3 DI4 DI5 DI6 DI7 DI8 DI9 DI0
When the input terminal is ON, the
corresponding binary bits is 1, OFF is 0, all DI
status is converted to the decimal number for
display.
●
y1.07
Output terminal status of the
third fault
Output terminal status of the last fault, the
order is:
When the output terminal is ON, the
corresponding binary bits is 1, OFF is 0, all
DI status is converted to the decimal number
for display.
●
y1.08 Reserved
y1.09 Power-on time of the third fault Current power-on time of the last fault
●
y1.10 Running time of the third fault Current running time of the last fault
●
y1.11 to
y1.12
Reserve
y1.13 Frequency of the second fault Frequency of the last fault
●
y1.14 Current of the second fault Current of the last fault
●
y1.15 Bus voltage of the second fault Bus voltage of the last fault
●
y1.16
Input terminal status of the
second fault
Input terminal status of the last fault, the
order is:
BIT9 BIT8 BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
DI1 DI2 DI3 DI4 DI5 DI6 DI7 DI8 DI9 DI0
When the input terminal is ON, the
corresponding binary bits is 1, OFF is 0, all
DI status is converted to the decimal number
for display.
●
y1.17 Output terminal status of the Output terminal status of the last fault, the
●
BIT4 BIT3 BIT2 BIT1 BIT0
SPB REL1 Reserve
SPA
REL2